مبدل هوشمند TIS امکان ورود قطعات غیر هوشمند را به سیستم هوشمند فراهم می‌کند،
این ماژول سایز کوچکی دارد و می‌توان آن را در جاهای مختلفی استفاده کرد، مبدل هوشمند TIS را می‌توان برای تبدیل کلیدهای سنتی به هوشمند و وارد کردن آن‌ها به دنیای هوشمند استفاده کرد، بدین گونه به کلید سنتی که همه خانه‌ها
وجود دارد، امکان اجرای سناریو، پخش موسیقی، بازکردن پرده برقی و غیره را داد، همچنین از این مبدل هوشمند برای اتصال به سنسورهای سنتی، گاز، دود ، سنسورهای آتشنشانی، و همچنین مگنت درب و پنجره می‌توان استفاده کرد.
از امکانات دیگر این مبدل پیشرفته و کارآمد هوشمند TIS می‌توان به این امکانات اشاره کرد:
دارای ۴ ورودی آنالوگ (Z1 تا Z4)
دارای LED اعلام وضعیت در سیستم هوشمند
قابلیت آپگرید توسط درگاه USB
قابلیت اتصال سنسورهای امنیتی نظیر: سنسورهای حرکتی، فشار، مگنت درب، پنجره و…
قابلیت اتصال سیستم اعلام حریق و سنسورهای ایمنی مانند گاز، دود و…
TIS-4Z-IN is a 4 zones Dry input contacts to sense any digital inputs, used to connect to any normal lighting switch to control lighting, also used for security and saving energy connected to the security PIR, also can be used for some BMS solutions using TIS Protocol.
Important Features
– 4 Digital inputs terminal.
– Support security and safety function
– Internal logic timer for each input zone.
– Broadcast address button.
– Toggle mode logic for 2 way switch connection.
– Small size , free locate can be installed inside the back box.
– TIS Bus Network enabled.
– ABS anti-flame case.
– UL USA certified terminal, ICs and PCB.
م
TIS 4 Digital Input Module
4 Zones Dry Inputs
Model: TIS-4Z-IN
Data Sheet Rev 1.3
Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and other hazards.
These instructions are an integral part of the product, and must remain with the end customer.
Basic information
This device is a product of the TIS system. It is a free locate device with 4 independent Digital inputs which can be controlled and communicate separately with TIS protocol messages, technical knowledge obtained in TIS training courses is a prerequisite to proper understanding how to install device. Advanced Programming knowledge about software obtained in the advanced training courses.
Intended use
Turning mechanical switch to digital TIS one, control lighting, saving energy and security, e.g. light on/off, brightness values, control air condition, and fan control.
Product characteristics
|
Input |
Number of channels Input Type Length of connected wire
|
4 Digital input. Open / Close < 350 meter
|
|
TIS Bus |
Number of devices on 1 line Bus voltage Current consumption
|
Max. 64 12-32 V DC <12 mA / 24 V DC
|
|
Protection |
Bus connection Digital input
|
Reverse Polarity Protection Low voltage <24V Protection
|
|
Reaction time |
|
approx. 20ms |
|
Mounting |
Free locate
|
By 2 screws installed anywhere. |
|
Connection terminal |
Data / bus
|
Screw terminal 0.25…2.5mm2
|
|
Operating and display elements |
Programming button/LED By TIS bus Upgrading
|
For assignment of the physical address TIS Protocol massages and commands 1 X mini USB for up to date upgrading. |
|
Functions for each zone |
Digital input Open Digital input close Revers control
|
20 commands 20 commands 1 command |
|
Weight |
Without packaging
|
0.4 KG |
|
Dimensions |
Width x length x height
|
91mm x 145mm x 75mm |
|
Housing |
Materials Casing color IP rating |
ABS anti fire Black Gray IP 20 |
|
Temperature range |
Operation Storage Transport
|
-10…50°C -20…50°C -25…75°C |
|
Air humidity |
|
<85% non-condensing |
Wiring diagram
Data connection
|
Bus connection
Screw terminals connection By using the Cat5e cable to connect to TIS bus 4 terminals (24V,D+, D-, GND)
|
|
|
|
|
|
Recomanded UTP cat5e color connection |
24V – Orange D+ – Blue D- – White Blue GND – White Orange |
Digital input connection
It is recomanded to use Cat5e cable for digital input zone.
Com port is the common termonal for all 4 zones
Z1..Z4 is the Digital input zones from 1-4.
Warranty
We provide a warranty as provided for by law.
Hologram warranty seal and product serial number is provided by each device.
Please send the description of the defect with Product S/N to our dealer network.