In Stock

کد کالا:b8c07dcb566b

مبدل هوشمند TIS امکان ورود قطعات غیر هوشمند  را به سیستم هوشمند فراهم می‌کند،
این ماژول سایز کوچکی دارد و می‌توان آن را در جاهای مختلفی استفاده کرد، مبدل هوشمند 
TIS را می‌توان برای تبدیل کلیدهای سنتی به هوشمند و وارد کردن آن‌ها به دنیای هوشمند استفاده کرد، بدین گونه به کلید سنتی که همه خانه‌ها

وجود دارد، امکان اجرای سناریو، پخش موسیقی، بازکردن پرده برقی و غیره را داد، همچنین از این مبدل هوشمند برای اتصال به سنسورهای سنتی، گاز، دود ، سنسورهای آتشنشانی، و همچنین مگنت درب و پنجره می‌توان استفاده کرد.

از امکانات  دیگر این مبدل پیشرفته و کارآمد هوشمند TIS می‌توان به این امکانات اشاره کرد:
۴ ورودی آنالوگ (Z1 تا  Z4)
LED اعلام وضعیت در سیستم هوشمند
 قابلیت آپگرید توسط درگاه 
 قابلیت اتصال سنسورهای امنیتی نظیر: سنسورهای حرکتی، فشار، مگنت درب، پنجره و
 قابلیت اتصال سیستم اعلام حریق و سنسورهای ایمنی مانند گاز، دود و

TIS-4Z-IN is a 4 zones Dry input contacts to sense any digital inputs, used to connect to any normal lighting switch to control lighting, also used for security and saving energy connected to the security PIR, also can be used for some BMS solutions using  TIS Protocol.  

Important Features

–  4 Digital inputs terminal.

–  Support security and safety function

–  Internal logic timer for each input zone.

–  Broadcast address button.

–  Toggle mode logic for 2 way switch connection.

–  Small size , free locate can be installed inside the back box.

–  TIS Bus Network enabled.

–  ABS anti-flame case.

–  UL USA  certified  terminal, ICs and PCB.


TIS 4 Digital Input Module

4 Zones Dry Inputs

Model: TIS-4Z-IN

Data Sheet Rev 1.3

Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and other hazards.

These instructions are an integral part of the product, and must remain with the end customer.           

Basic information

This device is a product of the TIS system. It is a free locate device with 4 independent Digital inputs which can be controlled and communicate separately with TIS protocol messages, technical knowledge obtained in TIS training courses is a prerequisite to proper understanding how to install device. Advanced Programming knowledge about software obtained in the advanced training courses.


Intended use

Turning mechanical switch to digital TIS one, control lighting, saving energy and security, e.g. light on/off, brightness values, control air condition, and fan control.



Product characteristics



Number of channels

Input Type

Length of connected wire



Digital input. Open / Close

< 350 meter



Number of devices on 1 line

Bus voltage

Current consumption


Max. 64

12-32 V DC

<12 mA / 24 V DC



Bus connection

Digital input


Reverse Polarity Protection

Low voltage <24V Protection


Reaction time



approx. 20ms


Free locate


By 2 screws installed anywhere.

Connection terminal

Data / bus


Screw terminal  0.25…2.5mm2


Operating and display elements

Programming button/LED

By TIS bus



For assignment of the physical address

TIS Protocol massages and commands

1 X mini USB for up to date upgrading.

Functions for each zone

Digital input Open

Digital input close

Revers control


20 commands

20 commands

1 command


Without packaging


0.4 KG


Width x length x height


91mm x 145mm x 75mm



Casing color

IP rating

ABS anti fire

Black Gray

IP 20

Temperature range








Air humidity


<85% non-condensing





Wiring diagram

Data connection



Bus connection


Screw terminals connection

By using the Cat5e cable to connect to TIS bus 4 terminals (24V,D+, D-, GND)





Recomanded UTP cat5e color connection

24V –  Orange

D+   –  Blue

D-    –  White Blue

GND – White Orange


Digital input connection

It is recomanded to use Cat5e cable for digital input zone.

Com port is the common termonal for all 4 zones

Z1..Z4 is the Digital input zones from 1-4.



We provide a warranty as provided for by law.

Hologram warranty seal and product serial number is provided by each device.

Please send the description of the defect with Product S/N to our dealer network.


Your custom content goes here. You can add the content for individual product
[vc_row layout="ts-row-wide" el_class="fix-column-no-margin"][vc_column width="1/3"][ts_single_image img_url="" link="#" style_effect="eff-border-scale" target="_self"][/vc_column][vc_column width="1/3"][ts_single_image img_url="" link="#" style_effect="eff-border-scale" target="_self"][/vc_column][vc_column width="1/3"][ts_single_image img_url="" link="#" style_effect="eff-border-scale" target="_self"][/vc_column][/vc_row]
بازگشت به بالا