برای تغذیه ماژول های سیستم هوشمند TIS، مورد استفاده قرار می گیرد.
ازجمله امکانات این ماژول:
دارای ولتاژ ثابت 24 ولت
قابلیت نصب بر روی ریل تابلویی
نحوه ارتباط با دیگر قطعات به 2 صورت : سیم کشی کردن از قسمت TIS bus و ارتباط از طریق کانکتورهای سبز رنگ کنار
هر قطعه
Power Supply 24V DC 1.5A
PS.24V-1.5A
TIS Power Supply 24VDC 1.5A
Din rail power supply with good heat sink, stable output voltage , output surge protection, input tolerance proof
Important Features
Stable 24 Volt DC / 1.5 Amps output-
Surge output Protection-
Over heat Protection-
– 80-250 V AC Input.
LED indicator for DC output signal –
Support TIS bus connection –
ABS anti-flame case-
UL USA certified relay, terminal, ICs and PCB-
Product CE certified-
TIS Power Supply 1.5 A
Model: P.S-24V-1.5A
Data Sheet Rev 1.2
Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and other hazards.
These instructions are an integral part of the product, and must remain with the end customer.
Basic information
This device is a product of the TIS system. It is din rail Power supply with 1.5A 24V DC, technical knowledge obtained in TIS training courses is a prerequisite to proper understanding how to install and test this device
Intended use
To give TIS Bus Network 24 voltage power supply to run all TIS devices.
Product characteristics
| Outputs | Voltage
Max Continues Current
|
24 DC
1.5 Amp |
| Inputs
|
Voltage
|
80-240 VAC |
| Protection | Short Output Protection
Over Heat Protection
Input Surge Protection
|
Output will turn off in case of short connection
Advanced IC to turn off outputs when temp increase Built in Protection fuse |
| Function & LED | LED Indicator ON
LED Indicator OFF |
LED Will turn ON if there is DC Output
In case of output problem LED will Turn OFF
|
| Mounting | Din Rail
Wall mount
|
Standard 35 mm Din rail
screw holder on the back of the module
|
| Connection terminal | Load and Power
Data / bus
|
Screw terminal 0,25…4mm2
Male female connectors Link + screw Terminal |
| Weight | Without packaging
|
0.35 KG |
| Dimensions | Width x length x height
|
90mm x 73mm x 76mm |
| Housing | Materials
Casing color IP rating |
ABS anti fire
Black Gray IP 20
|
| Temperature range | Operation
Storage Transport
|
-30…40°C
-20…60°C -30…70°C |
| Air humidity | <85% non-condensing |
Warranty
We provide a warranty as provided for by law.
Hologram warranty seal and product serial number is provided by each device.
Please send the description of the defect with Product S/N to our dealer network.