TIS Infrared Emitter with Current Sensor
TIS-IR-CUR
this device can be used to control TV, DVD and Split Air Condition , it can save up to 250 Infrared codes, coming along with Infrared emitter probe to be stick on the air condition receiver window
Important Features
– Infrared Emitter with IR cable and Probe
– Current Sensor up to 2 Amps.
– Internal logic for judging the Appliances ON or OFF.
– Broadcast address button.
– Can save up to 250 codes
– Small size , free locate can be installed inside the back box.
– TIS Bus Network enabled.
– ABS anti-flame case.
– UL USA certified terminal, ICs and PCB.
TIS Infrared Module
IR Emitter With Current Sensor
Model: TIS-IR-CUR
Data Sheet Rev 1.3
Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and other hazards.
These instructions are an integral part of the product, and must remain with the end customer.
Basic information
This device is a product of the TIS system. It is a free locate device with IR emitter output and current sensor which can be controlled and communicate separately with TIS protocol messages, technical knowledge obtained in TIS training courses is a prerequisite to proper understanding how to install device. Advanced Programming knowledge about software obtained in the advanced training courses.
Intended use
Controlling infrared appliances such as TV, DVD, CD Player etc…, also to control split air condition.
Product characteristics
|
Input |
Current Sensor Input Type
|
Maximum 2 Amps. Digital input. Open / Close
|
|
Outputs
|
IR Emitter Peak wave length Radiated emission power (Φe) Length of connected wire
|
940 nm 2,4 mW < 5 meters
|
|
TIS Bus |
Number of devices on 1 line Bus voltage Current consumption
|
Max. 64 12-32 V DC <15 mA / 24 V DC
|
|
Protection |
Bus connection IR Emitter |
Reverse Polarity Protection Reverse Polarity Protection
|
|
Reaction time |
|
approx. 20ms |
|
Mounting |
Free locate
|
By 2 screws installed anywhere. |
|
Connection terminal |
Data / bus
|
Screw terminal 0.25…2.5mm2
|
|
Operating and display elements |
Programming button/LED By TIS bus Upgrading
|
For assignment of the physical address TIS Protocol massages and commands 1 X mini USB for up to date upgrading. |
|
Functions |
IR Codes Current sensor
|
Can save up to 250 Codes Judging if ON/OFF Logic
|
|
Weight |
Without packaging
|
0.6 KG |
|
Dimensions |
Width x length x height
|
91mm x 145mm x 75mm |
|
Housing |
Materials Casing color IP Rate |
ABS anti fire Black Gray IP 20 |
|
Temperature range |
Operation Storage Transport
|
-10…50°C -20…50°C -25…75°C |
|
Air humidity |
|
<85% non-condensing |
Wiring diagram
Data connection
|
Bus connection
Screw terminals connection By using the Cat5e cable to connect to TIS bus 4 terminals (24V,D+, D-, GND)
|
|
|
|
|
|
Recomanded UTP cat5e color connection |
24V – Orange D+ – Blue D- – White Blue GND – White Orange |
For Current Sensor and IR Connection , Please read the product wiring diagram
Warranty
We provide a warranty as provided for by law.
Hologram warranty seal and product serial number is provided by each device.
Please send the description of the defect with Product S/N to our dealer network.