In Stock

کد کالا:dfb19e14d9e8

درگاه ورودی کلید های هوشمند لونا و مارس با شبکه و دیگر ماژول های هوشمندTIS  است.

بر اساس نوع استفاده، به چهار مدل تقسیم بندی می شود.

پنل ادیشن های  3 رله 5 آمپر و 3 رله 3 آمپر که  می تواند به عنوان سوئیچ و با ولتاژ آزاد، 3 تا 5 آمپر جریان را تحمل کرده و عبور دهد.

پنل ادیشن 2Z با قابلیت ارسال امواج IR: می توان چشمی ارسال کننده IR به آن متصل کرد.در زمانی که خواسته شود با تبلت یا موبایل، ادوات ریموت دار را کنترل کرد.

پنل ادیشن 3Z با خروجی ولتاژ 12V: می توان چشمی IR  به آن متصل کرد و یک خروجی 12 ولت هم برروی آن وجود دارد که می توان برای تغذیه ماژول خروجی که به آن متصل می شود را انجام دهد.

پنل ادیشن 2Z IR Reciver  : برای دریافت امواج IR می توان از این پنل ادیشن استفاده کرد.( زمان ارسال کد های IR از سایر ریموت ها به کلیدی که دارای پنل ادیشن IR Reciverاست)

Panel Addition 3 Relay 3Amps

ADD-3R-3A

ADD-3R-3A is  designed also to support 1 FCU to control 3 fan speeds as low, medium and high speed also can be set to control cool, heat, FAN as HVAC controller.  It give the panel a bus network port with extra functions of controlling 3rd party curtain motor left and right.  each output can support 3  Amps load.

Important Features

–  3 output Relay switch.

–  can configure to control HVAC and Fan Speed.

–  Working with TIS bus protocol

–  PC anti-flame case.

–  UL USA  certified terminal, ICs and PCB.

–  Product CE certified.

 

TIS Panel Addition

3 Channels 3 Amps

Model: ADD-3R3A ,  ADD-3R5A

Data Sheet Rev 1.3

Safety instructions

 

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and other hazards.

These instructions are an integral part of the product, and must remain with the end customer.           

Basic information

This device is a product of the TIS system. It is a bus coupler device that can be attached back of Mars series Panel with 3 independent free voltage Relay channels which can be controlled separately with TIS protocol messages, technical knowledge obtained in TIS training courses is a prerequisite to proper understanding how to install device. Advanced Programming knowledge about software obtained in the advanced training courses.

 

Intended use

Control curtains motors, fan speeds, Air condition FCU, e.g.  Shades open/close, Motors, fan low, fan med, fan high. This Product Can’t be used for controlling florescent light or saving energy lamp

 

 

 

 

Product characteristics

 

Outputs

Number of channels

Nominal voltage

Nominal current per channel

Low current

Lighting Incandescent Lamp

Motors /  Air condition

LED and CFL Lamp

 

3

0 – 230 V AC 50/60 Hz

 

5 A /  28 VDC

4 A / 230 VAC 

3 A / 230 VAC 

1 A / 230 VAC

Output switching current

Max switching current

Max Continues current 

 

5A/230 VAC

4A/230 VAC

 

Output service life

Mechanical service life

 

> 5,000,000 Times

 

Output switching times

Operating time

Releasing time

 

10mS (at nomi. Volt)

10 mS  (at nomi. Volt)

 

Other specification

Contact Resistance

Insulation Resistance

100mΩ max. (at 1A 24VDC)

1000MΩ (500VDC)

 

Reaction time

 

approx. 20ms

Function programmable options

3 Separate channels

Simple FCU Function

Fan speed control

Motor and Lighting

 

 

For control Incandescent lamps (200 watts)

Cool, Heat , Fan outputs

Low, Medium, High outputs

Ch1.Ch2 as open / close interlocked, Ch3 work independently.

 

Mounting 

Behind the panel

 

Attached to the back of TIS panel, can be fit in all world back box standards.

 

Connection terminal

Load and Power

Data / bus

Panel Link

Screw terminal  0,25…2mm2

connectors Link

Female 2 connectors for  TIS Panel connection

Weight

Without packaging

 

20 G

Dimensions

Width x length x height

With the cover

 

54mm x 50mm x 24mm

54mm x 50mm x 32mm

Housing

Materials

Casing color

IP rating

PC anti fire

White

IP 20

Temperature range

Operation

Storage

Transport

 

-30…60°C

-20…60°C

-30…75°C

Air humidity

 

<85% non-condensing

 

Warranty

We provide a warranty as provided for by law.

Hologram warranty seal and product serial number is provided by each device.

Please send the description of the defect with Product S/N to our dealer network.

info@tissmarthome.com

www.tissmarthome.com

Your custom content goes here. You can add the content for individual product
[vc_row layout="ts-row-wide" el_class="fix-column-no-margin"][vc_column width="1/3"][ts_single_image img_url="http://demo.theme-sky.com/images/Gon/product-detail-banner1.png" link="#" style_effect="eff-border-scale" target="_self"][/vc_column][vc_column width="1/3"][ts_single_image img_url="http://demo.theme-sky.com/images/Gon/product-detail-banner2.png" link="#" style_effect="eff-border-scale" target="_self"][/vc_column][vc_column width="1/3"][ts_single_image img_url="http://demo.theme-sky.com/images/Gon/product-detail-banner3.png" link="#" style_effect="eff-border-scale" target="_self"][/vc_column][/vc_row]
بازگشت به بالا